Home › Code lookup › P258F
Powertrain code · Computer

P258F Torque Management Request Output Signal

How urgent? Get it checked in the next few days

What it means

The engine computer sends a signal that tells other modules how much engine power to allow, and that signal has a fault.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for network or transmission codes
  2. Inspect wiring between the engine and transmission computers

Signs you may notice

  • Check engine light on
  • Harsh shifts or reduced power possible

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWiring or network fault between modules
  • CommonEngine or transmission computer needing a software update
  • PossibleControl module fault

Typical repair once the cause is confirmed

Repair the wiring or update the module software as directed by the maker.

Walk through it step by step: Harsh or late shifting →

Common questions

What does P258F mean?

The engine computer sends a signal that tells other modules how much engine power to allow, and that signal has a fault.

Can I drive with code P258F?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P258F?

Common possibilities to test include: wiring or network fault between modules; engine or transmission computer needing a software update; control module fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.