P260D PTO Engaged Lamp Control Circuit
What it means
The circuit for the light that shows the power take-off is engaged has a fault. This is common on work trucks only.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the indicator lamp
- Inspect the lamp wiring and connector
Signs you may notice
- Check engine light on
- PTO engaged light may not work
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonBurned-out bulb or LED
- CommonWiring or connector fault
- PossibleControl module fault
Typical repair once the cause is confirmed
Replace the lamp or repair the wiring.
Common questions
What does P260D mean?
The circuit for the light that shows the power take-off is engaged has a fault. This is common on work trucks only.
Can I drive with code P260D?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P260D?
Common possibilities to test include: burned-out bulb or led; wiring or connector fault; control module fault. A shop should confirm the cause before replacing parts.