Home › Code lookup › P260E
Powertrain code · Emissions

P260E Diesel Particulate Filter Regeneration Lamp Control Circuit

How urgent? Book a check when convenient

What it means

The circuit for the dash light that tells you the diesel particulate filter is cleaning itself has a fault.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check whether the lamp lights during a bulb check at key-on
  2. Inspect the wiring between the computer and cluster

Signs you may notice

  • Check engine light on
  • Particulate filter cleaning light may not come on

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty indicator lamp or cluster circuit
  • CommonWiring or connector fault
  • PossibleInstrument cluster or engine computer fault

Typical repair once the cause is confirmed

Repair the wiring or the indicator circuit in the instrument cluster.

Common questions

What does P260E mean?

The circuit for the dash light that tells you the diesel particulate filter is cleaning itself has a fault.

Can I drive with code P260E?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P260E?

Common possibilities to test include: faulty indicator lamp or cluster circuit; wiring or connector fault; instrument cluster or engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.