Home › Code lookup › P260F
Powertrain code · Emissions

P260F Evaporative System Monitoring Processor Performance

How urgent? Book a check when convenient

What it means

The part of the computer that checks the fuel vapor (EVAP) system for leaks while the car is off is not working correctly.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check for a software update from the maker
  2. Test the battery and charging system

Signs you may notice

  • Check engine light on
  • No change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonEngine computer or EVAP monitoring module needs a software update
  • CommonWeak battery or power interruption while parked
  • PossibleInternal module fault

Typical repair once the cause is confirmed

Update the module software; replace the module only if the fault remains.

Common questions

What does P260F mean?

The part of the computer that checks the fuel vapor (EVAP) system for leaks while the car is off is not working correctly.

Can I drive with code P260F?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P260F?

Common possibilities to test include: engine computer or evap monitoring module needs a software update; weak battery or power interruption while parked; internal module fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.