Home › Code lookup › P261B
Powertrain code · Cooling

P261B Coolant Pump "B" Control Circuit Range/Performance

How urgent? Get it checked in the next few days

What it means

The computer is watching the coolant pump "B" control circuit and is getting a signal that does not make sense for current conditions. Some engines use an electric pump to move coolant through the engine, turbo or heater.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Watch the temperature gauge and pull over if it climbs
  2. Check for other codes that point to the underlying problem
  3. Compare the coolant pump "B" control circuit reading with expected values in live data
  4. Inspect the wiring and connector

Signs you may notice

  • Check engine light on
  • Engine may run hot
  • Heater may blow cooler air

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailing or sticking electric coolant pump
  • CommonA real problem in the system the part works with
  • PossibleWiring or connector with high resistance
  • PossibleComputer software that needs an update

Typical repair once the cause is confirmed

Find out whether the electric coolant pump itself or the system it works with is at fault, then repair or replace as needed.

Known on these vehicles

Walk through it step by step: Engine overheating →

Common questions

What does P261B mean?

The computer is watching the coolant pump "B" control circuit and is getting a signal that does not make sense for current conditions. Some engines use an electric pump to move coolant through the engine, turbo or heater.

Can I drive with code P261B?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P261B?

Common possibilities to test include: failing or sticking electric coolant pump; a real problem in the system the part works with; wiring or connector with high resistance; computer software that needs an update. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.