P2636 Fuel Pump "B" Low Flow/Performance
What it means
The second fuel pump (on vehicles that have one) is not delivering the fuel flow or pressure the computer expects.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure fuel pressure and flow
- Check voltage and ground at the pump
Signs you may notice
- Check engine light on
- Loss of power under load
- Hard starting or stalling
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWeak secondary fuel pump
- CommonClogged filter or strainer
- PossibleWiring or voltage drop at the pump
- PossibleFaulty fuel pump driver module
Typical repair once the cause is confirmed
Replace the weak pump or clogged filter after checking the wiring.
Common questions
What does P2636 mean?
The second fuel pump (on vehicles that have one) is not delivering the fuel flow or pressure the computer expects.
Can I drive with code P2636?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2636?
Common possibilities to test include: weak secondary fuel pump; clogged filter or strainer; wiring or voltage drop at the pump; faulty fuel pump driver module. A shop should confirm the cause before replacing parts.