Home › Code lookup › P2641
Powertrain code · Computer

P2641 Torque Management Feedback Signal "B"

How urgent? Get it checked in the next few days

What it means

The computer is watching the torque management feedback signal and has spotted an electrical fault. The engine computer uses this signal to report back to other modules (often the transmission) how much torque it is making.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the connector and wiring for the torque management feedback signal, checking for damage, corrosion or a loose fit
  2. Check power, ground and signal with a meter
  3. Clear the code and see if it comes back

Signs you may notice

  • Check engine light on
  • Harsh or firm shifts
  • Reduced power mode possible

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWiring or connector fault between the engine and transmission computers
  • CommonNetwork communication problem between modules
  • PossibleModule software that needs an update
  • PossibleEngine or transmission computer fault

Typical repair once the cause is confirmed

Repair the wiring or network fault, or update the module software as the maker directs.

Walk through it step by step: Harsh or late shifting →

Common questions

What does P2641 mean?

The computer is watching the torque management feedback signal and has spotted an electrical fault. The engine computer uses this signal to report back to other modules (often the transmission) how much torque it is making.

Can I drive with code P2641?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2641?

Common possibilities to test include: wiring or connector fault between the engine and transmission computers; network communication problem between modules; module software that needs an update; engine or transmission computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.