Home › Code lookup › P2643
Powertrain code · Computer

P2643 Torque Management Feedback Signal "B" Low

How urgent? Get it checked in the next few days

What it means

The computer is watching the torque management feedback signal and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. The engine computer uses this signal to report back to other modules (often the transmission) how much torque it is making.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the wiring in the torque management feedback signal for rubbed-through insulation touching metal
  2. Check the wiring for a short to ground with a meter
  3. Clear the code and see if it returns right away

Signs you may notice

  • Check engine light on
  • Harsh or firm shifts
  • Reduced power mode possible

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWiring or connector fault between the engine and transmission computers
  • CommonNetwork communication problem between modules
  • PossibleModule software that needs an update
  • PossibleEngine or transmission computer fault

Typical repair once the cause is confirmed

Repair the wiring or network fault, or update the module software as the maker directs.

Walk through it step by step: Harsh or late shifting →

Common questions

What does P2643 mean?

The computer is watching the torque management feedback signal and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. The engine computer uses this signal to report back to other modules (often the transmission) how much torque it is making.

Can I drive with code P2643?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2643?

Common possibilities to test include: wiring or connector fault between the engine and transmission computers; network communication problem between modules; module software that needs an update; engine or transmission computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.