Home › Code lookup › P2665
Powertrain code · Fuel and air

P2665 Fuel Shutoff Valve "B" Control Circuit/Open

How urgent? Get it checked in the next few days

What it means

The computer is watching the fuel shutoff valve "B" control circuit and sees what looks like a broken or disconnected circuit. This valve can stop the flow of fuel, for example on diesel or dual-fuel systems.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Look over the connector and wiring for the fuel shutoff valve "B" control circuit, checking for damage, corrosion or a loose fit
  2. Check power, ground and resistance of the part with a meter
  3. Clear the code and see if it comes back

Signs you may notice

  • Check engine light on
  • Engine may not start or may stall

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonUnplugged, loose or corroded connector at the fuel shutoff valve
  • CommonBroken or chafed wire in the fuel shutoff valve "B" control circuit
  • CommonFailed fuel shutoff valve
  • PossibleBlown fuse or failed relay feeding the circuit
  • PossibleControl module fault (rare)

Typical repair once the cause is confirmed

Repair the wiring or connector if it is damaged; otherwise replace the fuel shutoff valve.

Walk through it step by step: Car won't start →

Common questions

What does P2665 mean?

The computer is watching the fuel shutoff valve "B" control circuit and sees what looks like a broken or disconnected circuit. This valve can stop the flow of fuel, for example on diesel or dual-fuel systems.

Can I drive with code P2665?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P2665?

Common possibilities to test include: unplugged, loose or corroded connector at the fuel shutoff valve; broken or chafed wire in the fuel shutoff valve "b" control circuit; failed fuel shutoff valve; blown fuse or failed relay feeding the circuit. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.