P2666 Fuel Shutoff Valve "B" Control Circuit Low
What it means
The computer is watching the fuel shutoff valve "B" control circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. This valve can stop the flow of fuel, for example on diesel or dual-fuel systems.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Inspect the wiring in the fuel shutoff valve "B" control circuit for rubbed-through insulation touching metal
- Check the wiring for a short to ground with a meter
- Clear the code and see if it returns right away
Signs you may notice
- Check engine light on
- Engine may not start or may stall
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonControl wire to the fuel shutoff valve shorted to ground
- CommonFailed fuel shutoff valve
- PossibleCorroded or loose connector
- PossibleControl module fault (rare)
Typical repair once the cause is confirmed
Fix any shorted wiring first; if the wiring tests good, replace the fuel shutoff valve.
Common questions
What does P2666 mean?
The computer is watching the fuel shutoff valve "B" control circuit and is reading a voltage that is lower than it should be, which often means a short to ground or a failed part. This valve can stop the flow of fuel, for example on diesel or dual-fuel systems.
Can I drive with code P2666?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2666?
Common possibilities to test include: control wire to the fuel shutoff valve shorted to ground; failed fuel shutoff valve; corroded or loose connector; control module fault (rare). A shop should confirm the cause before replacing parts.