P2674 Injection Pump Fuel Calibration Not Learned
What it means
The diesel injection pump fuel delivery calibration has not been learned by the engine computer.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Ask whether the injection pump or computer was replaced
- Enter the pump calibration data with a scan tool
Signs you may notice
- Check engine light on
- Rough running, smoke or reduced power possible
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonCalibration not done after replacing the pump or computer
- CommonPump calibration data not entered
- PossibleEngine computer fault
Typical repair once the cause is confirmed
Program the injection pump calibration into the engine computer.
Common questions
What does P2674 mean?
The diesel injection pump fuel delivery calibration has not been learned by the engine computer.
Can I drive with code P2674?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P2674?
Common possibilities to test include: calibration not done after replacing the pump or computer; pump calibration data not entered; engine computer fault. A shop should confirm the cause before replacing parts.