Home › Code lookup › P2787
Powertrain code · Transmission

P2787 Clutch Temperature Too High

How urgent? Stop driving as soon as it's safe. This can cause damage or be unsafe.

What it means

The clutch in an automated manual or dual-clutch transmission is overheating, usually from slipping.

Can I keep driving?

Not until it cools. Pull over when safe and let it rest. Avoid creeping in traffic, slow hill starts and riding the clutch. If there's a burning smell, slipping, or the warning returns quickly, have it towed; an overheated clutch can fail suddenly.

What to test before replacing parts

Check clutch wear and engagement, actuator adjustment and clutch temperature data on a scanner, and check for software updates before replacing the clutch.

  1. Pull over and let it cool
  2. Use the brake, not the gas, to hold the car on hills
  3. Have the clutch checked for wear

Signs you may notice

  • Transmission warning light or overheat message
  • Burning smell
  • Judder or slipping when pulling away

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonCreeping in traffic or holding the car on a hill with the gas
  • CommonHeavy load or towing
  • CommonWorn clutch slipping
  • PossibleClutch adaptation values out of range

Typical repair once the cause is confirmed

Let it cool; a worn clutch will need replacement.

Walk through it step by step: Clutch slipping →

Common questions

What does P2787 mean?

The clutch in an automated manual or dual-clutch transmission is overheating, usually from slipping.

Can I drive with code P2787?

Not until it cools. Pull over when safe and let it rest. Avoid creeping in traffic, slow hill starts and riding the clutch. If there's a burning smell, slipping, or the warning returns quickly, have it towed; an overheated clutch can fail suddenly.

What causes P2787?

Common possibilities to test include: creeping in traffic or holding the car on a hill with the gas; heavy load or towing; worn clutch slipping; clutch adaptation values out of range. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.