P278F Clutch "B" Adaptive Learning at Limit
What it means
The computer has adjusted clutch "B" as far as it can to make up for wear and cannot compensate any more.
Can I keep driving?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the fluid
- Have the clutch checked for wear
- Reset and relearn the clutch adaptation
Signs you may notice
- Check engine or transmission light on
- Slipping or judder
- Harsh shifts
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn clutch
- CommonLow or dirty transmission fluid
- PossibleAdaptive values not reset after repair
- PossibleSticking clutch actuator or solenoid
Typical repair once the cause is confirmed
Replace the worn clutch if needed, then relearn the adaptation.
Common questions
What does P278F mean?
The computer has adjusted clutch "B" as far as it can to make up for wear and cannot compensate any more.
Can I drive with code P278F?
If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.
What causes P278F?
Common possibilities to test include: worn clutch; low or dirty transmission fluid; adaptive values not reset after repair; sticking clutch actuator or solenoid. A shop should confirm the cause before replacing parts.