U0166 Lost Communication With Auxiliary Heater Control Module
What it means
Other computers in the car have stopped hearing from the auxiliary heater module. It runs the heating and air conditioning.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Test the battery and charging voltage first
- Check the fuses, power and ground for the auxiliary heater module
- See which modules answer a scan tool to narrow down the break
- Inspect network wiring and connectors near the module
Signs you may notice
- Heat or A/C may not work or controls may not respond
- Blower may stay on one speed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonThe auxiliary heater module lost power or ground (blown fuse or bad ground)
- CommonDamaged, corroded or loose network wiring or connector
- CommonWeak battery or low system voltage
- PossibleFailed auxiliary heater module
- PossibleAnother module shorting out the network
Typical repair once the cause is confirmed
Restore power, ground or wiring to the auxiliary heater module; replace the module only after those test good.
Common questions
What does U0166 mean?
Other computers in the car have stopped hearing from the auxiliary heater module. It runs the heating and air conditioning.
Can I drive with code U0166?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes U0166?
Common possibilities to test include: the auxiliary heater module lost power or ground (blown fuse or bad ground); damaged, corroded or loose network wiring or connector; weak battery or low system voltage; failed auxiliary heater module. A shop should confirm the cause before replacing parts.