Home › Dodge › Dakota › 1996
My vehicle

Your 1996 Dodge Dakotaproblems, repair costs and recalls

What we've documented about the 1996 Dodge Dakota: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 199662 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeAbout every 3,000–6,000 miles, depending on the owner's manual schedule · V8 engines hold about 6 quarts. Regular changes matter on the 4.7L, which is prone to sludge.
Price not verified
Ask for an estimate
Front brake pads (and rotors if worn)About every 30,000–50,000 miles · Rotors add to that.
Price not verified
Ask for an estimate
Rear brake shoes and drumsAbout every 50,000–80,000 miles · Dakotas use rear drum brakes.
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3–5 years
Price not verified
Ask for an estimate
Spark plug replacementAbout every 30,000 miles (older Magnum engines) to 100,000 miles (later engines)
Price not verified
Ask for an estimate
Coolant drain and refillAbout every 5 years or 100,000 miles (follow your manual; older years are shorter)
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1996 Dodge Dakota

6 documented issues apply to 1996, most serious first.

Stop soon1996–2011Transmission

Automatic transmission slipping or failing

What you'll notice
Slipping when accelerating hard or going uphill, late or harsh shifts, the transmission stuck in one gear (limp mode), no reverse, or the truck not moving in gear.
Why it happens
The automatics in the Dakota wear out from heat, especially when towing or hauling, and the torque converter can fail. Old fluid speeds up the wear.
What to do
Check the fluid level and smell right away. If it slips or goes into limp mode, have codes read and get a transmission diagnosis before driving much more.
Repair costInsufficient verified pricing for this vehicle and repair
Replace automatic transmission with remanufactured unit. Prepare an itemized shop request.
Walk through this symptom: Transmission slipping →
Stop soon1996–2004Suspension

Front ball joints wear out early

What you'll notice
Clunking from the front end, loose or wandering steering, uneven tire wear, or a wobble at speed.
Why it happens
The factory upper and lower ball joints are sealed and wear out quickly once their boots tear and water gets in, often well before 100,000 miles. A separated joint can let a wheel fold under.
What to do
Have the front end checked if you hear clunks. Replace worn joints in pairs and get an alignment afterwards.
Get checked1996–2003EngineMagnum 3.9L V6, 5.2L V8 and 5.9L V8

Intake plenum gasket leak burns oil

What you'll notice
The engine uses oil with no outside leak, pings under acceleration, idles rough or misfires, and oil can be seen inside the throttle body. Spark plugs and oxygen sensors foul.
Why it happens
The gasket under the stamped-steel plate on the bottom of the Magnum intake manifold fails, so oil vapor from the crankcase is pulled into the engine and burned. Chrysler issued a service bulletin (09-05-00) for it.
What to do
Have a shop check for oil in the intake and test for the leak. Fix it with an upgraded plate-and-gasket kit rather than just a new paper gasket, so it does not come back.
Repair costInsufficient verified pricing for this vehicle and repair
Replace intake plenum pan gasket with upgraded plate kit. Prepare an itemized shop request.
Walk through this symptom: Oil level keeps dropping →
Get checked1996–2003EngineMagnum 3.9L V6, 5.2L V8 and 5.9L V8

Camshaft position sensor failure

What you'll notice
Check engine light with codes like P0340 or P1391, hard starting or no start, rough idle, misfires or stalling.
Why it happens
The camshaft position sensor in the distributor gets dirty or fails with age, and the engine computer loses track of timing.
What to do
Have the codes read. The sensor is inexpensive and quick to replace; do not keep driving if the engine stalls in traffic.
Repair costInsufficient verified pricing for this vehicle and repair
Replace camshaft position sensor. Prepare an itemized shop request.
Get checked1996–2004Engine

Stalling while driving from crank sensor fault

What you'll notice
The engine cuts out while driving or coasting to a stop, idles rough, or cranks but will not start until it sits for a while.
Why it happens
On these trucks the crankshaft position sensor or its wiring connection fails, so the engine computer loses the signal it needs to run the engine. Owners also report a loose engine computer connector causing the same thing.
What to do
Have codes read right after a stall. A shop can check the crank sensor signal and its connector; replacing the sensor is a common first fix.
Repair costInsufficient verified pricing for this vehicle and repair
Replace crankshaft position sensor. Prepare an itemized shop request.
Walk through this symptom: Engine stalls while driving →
Monitor1996–2011ExhaustV6 and V8 engines

Broken exhaust manifold bolts cause ticking

What you'll notice
A ticking or puffing noise from the engine bay that is loudest on a cold start and may fade as the engine warms up. Sometimes an exhaust smell.
Why it happens
The bolts holding the exhaust manifolds to the cylinder heads rust and snap from repeated heating and cooling, letting exhaust leak at the joint.
What to do
Not urgent, but have it fixed before more bolts break or the gasket burns through. Keep exhaust fumes out of the cab.
Repair costInsufficient verified pricing for this vehicle and repair
Extract broken manifold bolts and replace bolts and gasket. Prepare an itemized shop request.
Price guide

Repair prices for your 1996 Dodge Dakota

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Replace intake plenum pan gasket with upgraded plate kit
  • Replace camshaft position sensor
  • Extract broken manifold bolts and replace bolts and gasket
  • Replace crankshaft position sensor
  • Replace automatic transmission with remanufactured unit
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1996 Dodge Dakota
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1996 Dodge Dakota as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.