Your 2004 Mazda Mazda3problems, repair costs and recalls
What we've documented about the 2004 Mazda Mazda3: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2004 Mazda Mazda3
4 documented issues apply to 2004, most serious first.
Airbag light on from water in crash sensor (recall)
- What you'll notice
- The airbag warning light stays lit on the dash.
- Why it happens
- The housing of the front crash-zone sensor can crack and let water in, shorting the sensor so the airbags may not work in a crash. Mazda recalled 2004 cars to inspect and replace the sensor.
- What to do
- Ask the dealer to check your VIN for open recalls. An airbag light that stays on means the airbags may be switched off, so get it diagnosed promptly.
Steering wheel emblem can break apart when airbag deploys (recall)
- What you'll notice
- No warning signs in normal driving. The danger only shows up if the driver airbag goes off.
- Why it happens
- The Mazda emblem on the driver airbag cover can shatter when the airbag deploys and send sharp pieces toward the driver. Mazda recalled these cars to replace the cover.
- What to do
- Check your VIN for an open recall and have the airbag cover replaced at a Mazda dealer as soon as possible.
Worn or broken engine mounts
- What you'll notice
- Clunking when you shift into drive or reverse, heavy vibration at idle that you feel in the seat and steering wheel, or a thump when you get on and off the gas.
- Why it happens
- The rubber engine and transmission mounts, especially the upper mount, can crack or tear with age and mileage, letting the engine move around more than it should.
- What to do
- Have a mechanic check the mounts with the hood open while someone shifts between drive and reverse. Replace any torn mount before it puts extra strain on axles, hoses and the exhaust.
Check engine light from a rubbed-through air/fuel sensor wire
- What you'll notice
- Check engine light comes on with codes such as P0131 or P2251; the car may otherwise feel normal.
- Why it happens
- The wiring for the front air/fuel ratio sensor can rub against a nearby bracket and wear through. Mazda described the check and repair in a service bulletin.
- What to do
- Have the sensor harness inspected before replacing parts. A damaged sensor or harness should be repaired so fuel economy and emissions stay normal.
Repair prices for your 2004 Mazda Mazda3
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace front crash sensor
- Replace steering wheel emblem or airbag cover
- Repair sensor wiring or replace air/fuel sensor
- Replace worn engine or transmission mount
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…