Home › Mazda › Mazda3 › 2019
My vehicle

Your 2019 Mazda Mazda3problems, repair costs and recalls

What we've documented about the 2019 Mazda Mazda3: problems owners and shops report, typical repair and upkeep costs, and safety recalls.

Ownership snapshot

Averages, not quotes
Problems documented for 201953 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Synthetic oil and filter changeEvery 5,000–7,500 miles
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–60,000 miles
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 40,000–70,000 miles
Price not verified
Ask for an estimate
12-volt battery replacementAbout every 3–5 years · Models with i-stop start-stop need a matching EFB or AGM battery.
Price not verified
Ask for an estimate
Spark plug replacementAbout every 75,000 miles
Price not verified
Ask for an estimate
Coolant drain and refillFirst at about 10 years or 120,000 miles, then more often
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 2019 Mazda Mazda3

5 documented issues apply to 2019, most serious first.

Stop soon2019–2020Brakes

Automatic emergency braking activates for no reason (recall)

What you'll notice
The car suddenly brakes hard with nothing in the way, usually while driving normally.
Why it happens
The Smart Brake Support system can wrongly detect an obstacle. Mazda updated the software and replaced or updated the instrument cluster on some cars.
What to do
Check your VIN for open recalls and get the update done right away. Until then, stay alert for sudden braking and ask the dealer about switching the system off.
Repair costInsufficient verified pricing for this vehicle and repair
Update driver-assist system software. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Stop soon2019Engine

Engine may stall while driving (recall)

What you'll notice
The engine shuts off while driving or at idle, often with warning lights, and may then restart.
Why it happens
A programming error in the engine computer could cause a stall. Mazda reprogrammed affected cars under a recall that also covered some Mazda6 and CX-5 models.
What to do
Check your VIN for open recalls and have the engine computer reprogrammed. A stall in traffic is dangerous, so do not put this off.
Repair costInsufficient verified pricing for this vehicle and repair
Update engine control software. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Walk through this symptom: Engine stalls while driving →
Stop soon2019Suspension

Lug nuts can loosen (recall)

What you'll notice
Clicking or clunking from a wheel, vibration, or a wobble that gets worse with speed.
Why it happens
Lug nuts on some cars may not have been tightened correctly and can work loose, which could let a wheel come off. Mazda recalled them to retighten the nuts.
What to do
Check your VIN for an open recall. If you hear clunking from a wheel, stop and check the lug nuts before driving further.
Repair costInsufficient verified pricing for this vehicle and repair
Replace all wheel lug nuts. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Get checked2019Safety

Front head restraint may not lock in place (recall)

What you'll notice
The front headrest moves down or does not click into its raised position.
Why it happens
Seat fabric can get in the way of the headrest lock. Mazda recalled affected cars to add spacers.
What to do
Check your VIN for an open recall. A headrest that will not lock gives less protection in a rear crash, so get it fixed.
Repair costInsufficient verified pricing for this vehicle and repair
Replace front head restraint. Prepare an itemized shop request. A dealer can check your VIN for possible recall or extended-warranty coverage.
Get checked2019Engine2.5L Skyactiv-G

Check engine light from cylinder deactivation fault

What you'll notice
The check engine light comes on with code P3400, sometimes with rough running.
Why it happens
The 2.5L engine shuts off two cylinders when cruising. Mazda issued a bulletin for a fault in that system and later released a new cylinder head assembly for repairs.
What to do
Have the code read at a Mazda dealer and ask about the cylinder deactivation bulletin. Do not ignore it if the engine runs rough or the light flashes.
Repair costInsufficient verified pricing for this vehicle and repair
Update engine software and inspect valve train. Prepare an itemized shop request.
Walk through this symptom: Check engine light on →
Price guide

Repair prices for your 2019 Mazda Mazda3

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Update driver-assist system software
  • Update engine control software
  • Replace all wheel lug nuts
  • Replace front head restraint
  • Update engine software and inspect valve train
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 2019 Mazda Mazda3
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 2019 Mazda Mazda3 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.