Your 2013 Mazda Mazda3problems, repair costs and recalls
What we've documented about the 2013 Mazda Mazda3: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2013 Mazda Mazda3
3 documented issues apply to 2013, most serious first.
Worn or broken engine mounts
- What you'll notice
- Clunking when you shift into drive or reverse, heavy vibration at idle that you feel in the seat and steering wheel, or a thump when you get on and off the gas.
- Why it happens
- The rubber engine and transmission mounts, especially the upper mount, can crack or tear with age and mileage, letting the engine move around more than it should.
- What to do
- Have a mechanic check the mounts with the hood open while someone shifts between drive and reverse. Replace any torn mount before it puts extra strain on axles, hoses and the exhaust.
Hatch struts can corrode and let the liftgate drop (recall)
- What you'll notice
- The rear hatch will not stay up on its own, sinks slowly, or drops suddenly.
- Why it happens
- The gas struts that hold up the liftgate on hatchbacks can rust and break. Mazda recalled these cars to replace both struts.
- What to do
- Check your VIN for an open recall. Until it is fixed, hold or prop the hatch when loading so it cannot fall on anyone.
Oil leak and rattle from the drive belt tensioner
- What you'll notice
- A rattle from the front of the engine, mostly when accelerating, and oily residue around the belt tensioner.
- Why it happens
- The hydraulic auto-tensioner for the drive belt on the 2.0L Skyactiv engine can leak its oil and lose damping, letting the belt flap. Mazda issued a bulletin covering the leak and noise.
- What to do
- Have the tensioner and belt inspected. Replace a leaking tensioner before the belt slips or comes off, which would cut charging and engine cooling.
Repair prices for your 2013 Mazda Mazda3
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace worn engine or transmission mount
- Replace rear hatch support struts
- Replace drive belt tensioner and belt
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…