Your 2011 Mazda Mazda3problems, repair costs and recalls
What we've documented about the 2011 Mazda Mazda3: problems owners and shops report, typical repair and upkeep costs, and safety recalls.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2011 Mazda Mazda3
4 documented issues apply to 2011, most serious first.
Driver seat rocks back and forth (recall)
- What you'll notice
- The driver seat feels loose and rocks or tilts, especially when you shift your weight or brake.
- Why it happens
- On seats with a manual height lever, the lifter links can break or come loose from the seat frame. Mazda recalled these cars and added a reinforcing bracket or a new adjuster.
- What to do
- Ask the dealer to check your VIN for open recalls. If the seat rocks, have the free recall repair done soon, since a loose seat is a crash safety concern.
Worn or broken engine mounts
- What you'll notice
- Clunking when you shift into drive or reverse, heavy vibration at idle that you feel in the seat and steering wheel, or a thump when you get on and off the gas.
- Why it happens
- The rubber engine and transmission mounts, especially the upper mount, can crack or tear with age and mileage, letting the engine move around more than it should.
- What to do
- Have a mechanic check the mounts with the hood open while someone shifts between drive and reverse. Replace any torn mount before it puts extra strain on axles, hoses and the exhaust.
Early clutch wear on manual cars
- What you'll notice
- The clutch slips when you accelerate hard, the engine revs without the car speeding up, the pedal feels soft or sticks, or the car is hard to get into gear.
- Why it happens
- Manual-transmission cars from these years drew many reports of clutches wearing out far earlier than expected, often well before typical clutch life.
- What to do
- Have a shop check the clutch and the hydraulic master and slave cylinders. If the clutch is replaced, have the hydraulics inspected at the same time.
Hatch struts can corrode and let the liftgate drop (recall)
- What you'll notice
- The rear hatch will not stay up on its own, sinks slowly, or drops suddenly.
- Why it happens
- The gas struts that hold up the liftgate on hatchbacks can rust and break. Mazda recalled these cars to replace both struts.
- What to do
- Check your VIN for an open recall. Until it is fixed, hold or prop the hatch when loading so it cannot fall on anyone.
Repair prices for your 2011 Mazda Mazda3
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace worn engine or transmission mount
- Replace clutch kit
- Repair or replace driver seat recliner hardware
- Replace rear hatch support struts
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…