Ram 2500problems, repair costs and recalls
Problems reported across 1996–2027. Pick your model year below to see what applies to your vehicle. Sold as the Dodge Ram 2500 through the 2010 model year.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems
26 documented issues across all years, most serious first.
Loose timing-case dowel pin ("killer dowel pin")
- What you'll notice
- Usually no warning. In the worst case a sudden loud clatter or grinding from the front of the engine, followed by the engine quitting.
- Why it happens
- A small alignment pin pressed into the front of the block behind the timing cover can work loose from vibration and fall into the timing gears.
- What to do
- If the pin has never been secured, have a diesel shop install a retaining tab kit. Shut the engine off right away if you hear new grinding from the front.
VP44 injection pump failure (weak lift pump)
- What you'll notice
- Hard starting, rough or surging idle, sudden loss of power or the engine dying while driving, often with a fuel-related trouble code.
- Why it happens
- The electronic VP44 injection pump is cooled and lubricated by the fuel it gets from the lift pump. When the factory lift pump weakens, the injection pump runs starved and hot and fails.
- What to do
- Have fuel supply pressure tested. Fix a weak lift pump before or along with any injection pump work. Tow the truck in if it stalls and will not restart.
Cracked "53" engine block
- What you'll notice
- Slow coolant loss, a damp spot or seepage on the passenger side of the block, white smoke or overheating.
- Why it happens
- Some blocks from this period, marked with a "53" casting number on the driver side, have thin water jacket walls that can crack, especially with towing, added power or overheating.
- What to do
- Stop driving if it is overheating. Have a diesel shop confirm the casting number and pressure-test the cooling system if coolant keeps disappearing.
Violent front-end shake ("death wobble") from worn front-end parts
- What you'll notice
- Hard side-to-side shaking of the steering wheel and front end after hitting a bump at speed, or loose, wandering steering.
- Why it happens
- The solid front axle relies on the track bar, tie rods, drag link, ball joints and steering damper. Wear or looseness in any of them, and quick-wearing ball joints on early trucks, can start the shake.
- What to do
- Slow down gently and pull over when it happens. Have the whole front end inspected for play before driving far, and check the VIN for open steering recalls.
EGR cooler leaking coolant into the engine
- What you'll notice
- White exhaust smoke with a sweet smell, coolant level dropping with no outside leak, or pressure in the coolant overflow tank.
- Why it happens
- Heat cycling and soot buildup fatigue the cooler that chills recirculated exhaust gas. Once it cracks inside, coolant is drawn into the intake.
- What to do
- Stop driving and have it checked if you see sweet-smelling white smoke and coolant loss. Coolant in the cylinders can badly damage the engine.
Intake heater grid bolt can loosen and fall into the engine
- What you'll notice
- Often no warning before it fails. Sometimes hard cold starts. If the bolt drops in, sudden knocking and severe engine damage.
- Why it happens
- The grid heater that warms intake air for cold starts is held by internal fasteners that loosen from heat, soot and corrosion over many miles.
- What to do
- Ask a diesel shop to check the grid heater for looseness at service time on higher-mileage trucks. Stop the engine at once if a sudden knock appears.
Drag link nut can loosen (recall 19V-021)
- What you'll notice
- Loose or wandering steering, clunking, or a sudden loss of steering if the link separates.
- Why it happens
- A jam nut on the steering drag link adjuster may not hold, letting one end of the link separate.
- What to do
- Check the VIN for this recall and have it done right away. Have any new steering looseness inspected before driving.
Hemi lifter and camshaft wear
- What you'll notice
- A steady ticking or tapping from the engine, then misfires, a rough idle and a check-engine light.
- Why it happens
- Roller lifters can stop rolling and wear flat, then grind down the camshaft lobes. It is widely reported and the subject of a class action lawsuit.
- What to do
- Have a ticking Hemi checked promptly; catching it early limits the damage. Use the correct oil and change it on time.
CP4 high-pressure fuel pump failure
- What you'll notice
- Hard starting, loss of power or the engine shutting off while driving, sometimes with low fuel pressure codes.
- Why it happens
- The CP4 pump used for these two years can wear internally and send metal through the whole fuel system. Ram went back to the older CP3 pump for 2021.
- What to do
- Drain the water separator and change fuel filters on time. Tow the truck in if it stalls; metal in the filter means the whole fuel system needs inspection.
Side curtain airbag inflator may rupture (recall 25V-824)
- What you'll notice
- No warning signs. The problem shows up only if the curtain airbag deploys.
- Why it happens
- A manufacturing defect may let the side curtain airbag inflator rupture during deployment.
- What to do
- Check the VIN for this recall and get the repair as soon as parts are available.
Transmission fluid can spray from the dipstick tube (recall 22V-835)
- What you'll notice
- A hot oil smell or smoke from under the truck after hard driving or towing, and wet fluid near the dipstick tube.
- Why it happens
- On the 68RFE six-speed automatic, heat and pressure can push fluid out of the dipstick tube onto hot parts, creating a fire risk and lowering the fluid level.
- What to do
- Check the VIN for this recall and have the fluid level checked. Pull over and shut off the engine if you see smoke.
Intake air heater relay can short and start a fire (recalls 21V-163, 21V-798)
- What you'll notice
- A burning electrical smell or smoke from under the hood, even with the truck parked and off.
- Why it happens
- The relay that powers the intake air heater for cold starts can short internally and overheat.
- What to do
- Check the VIN for open recalls right away. Until the fix is done, park outside and away from buildings and other vehicles.
Software may let speed exceed the tire rating (recall 26V-288)
- What you'll notice
- No warning signs; the truck may allow higher top speeds than its tires are rated for.
- Why it happens
- A powertrain control software error may not limit top speed to match the tires fitted, raising the risk of tire failure at very high speed.
- What to do
- Check the VIN for this recall and get the software update. Stay within legal speeds until it is done.
Instrument cluster display can go blank (recalls 25V-826, 26V-225)
- What you'll notice
- The gauge cluster screen goes dark, so speed and warning lights are not shown.
- Why it happens
- Software errors in the instrument cluster can make the display fail.
- What to do
- Check the VIN for these recalls and get the update. If the cluster goes blank, pull over safely and have it fixed before driving on.
Trailer lights and trailer brakes may fail (recall 26V-059)
- What you'll notice
- Trailer brake lights, turn signals or trailer brakes stop working while towing.
- Why it happens
- A faulty trailer tow module can cut power to trailer lighting and the electric trailer brake controller.
- What to do
- Check the VIN for this recall. Do not tow until the trailer tow module has been replaced if your truck is included.
Airbag and stability control software error (recall 25V-882)
- What you'll notice
- Possible airbag or stability control warning lights; often no warning at all.
- Why it happens
- A software error in the occupant restraint controller may keep the driver airbag or seat belt pretensioner from firing and can switch off stability control.
- What to do
- Check the VIN for this recall and get the update right away.
Steering column module may disable stability control (recalls 26V-244, 26V-651)
- What you'll notice
- Stability control warnings, or stability control not working.
- Why it happens
- A fault in the steering column control module can cause a loss of electronic stability control.
- What to do
- Check the VIN for these recalls and have the module replaced. Drive with extra care on slippery roads until it is done.
47RE automatic slipping or losing overdrive
- What you'll notice
- Slipping under load, late or soft shifts, shudder when the converter locks, or no overdrive, especially when towing.
- Why it happens
- The 47RE four-speed automatic is marginal behind the Cummins torque. Heavy towing and heat wear the overdrive band, clutches and converter.
- What to do
- Check the fluid level and condition and have the transmission looked at early. Avoid heavy towing until it is fixed, since slipping builds heat and speeds up the damage.
48RE automatic slipping, shudder or overdrive failure
- What you'll notice
- Slipping, flare between gears, converter shudder or loss of overdrive, usually worse when towing or after added power.
- Why it happens
- The 48RE is an updated four-speed but still works hard behind the diesel. Heat and load wear the bands, clutches and converter.
- What to do
- Keep the fluid fresh and full and have shifting problems checked early. Ease off heavy towing until it is diagnosed.
Common-rail fuel injector wear
- What you'll notice
- Rough idle, extra smoke, a knocking or cackling sound, harder starting and lower fuel mileage.
- Why it happens
- On the common-rail 5.9, injector nozzles and seats wear with mileage and dirty fuel, so they leak or spray poorly.
- What to do
- Have a diesel shop run an injector return-flow test. Changing fuel filters on schedule helps the injectors last.
Diesel particulate filter clogging and fuel in the oil
- What you'll notice
- Frequent cleaning cycles, a reduced-power mode, poor mileage, filter warning messages, or the oil level rising.
- Why it happens
- Short trips and lots of idling stop the filter from burning off soot. The extra fuel used during cleaning cycles can wash into the oil on these early trucks.
- What to do
- Give the truck regular longer drives, check the oil level often, and have filter warnings looked at before the truck goes into limp mode.
Variable-geometry turbo sticking
- What you'll notice
- Low power, a boost-related code, whistling or grinding from the turbo, or a weak exhaust brake.
- Why it happens
- Soot builds up on the turbo vanes and their ring so they bind, and the electronic actuator that moves them can wear out.
- What to do
- Have the turbo and actuator diagnosed. Cleaning the vanes sometimes fixes it before a replacement is needed.
DEF / SCR system faults and NOx sensor failures
- What you'll notice
- Emissions warnings, a countdown to reduced speed, erratic DEF gauge readings, white crystals around the dosing parts, or heater faults in winter.
- Why it happens
- The exhaust fluid system can be upset by contaminated or old fluid, crystal buildup in the pump or doser, and failing heaters or NOx sensors.
- What to do
- Use fresh, sealed DEF and have warnings checked before the speed limit kicks in.
Wheel speed sensor faults (TSB 05-004-24)
- What you'll notice
- ABS, traction control or brake warning lights coming on, sometimes on and off.
- Why it happens
- Wheel speed sensor faults are a known issue on these trucks, and Ram issued a service bulletin for them.
- What to do
- Have the codes read and ask the dealer about TSB 05-004-24. ABS and stability control may not work while the light is on.
Rearview camera may not display (recall 26V-327)
- What you'll notice
- A blank or missing backup camera image when shifting into reverse.
- Why it happens
- Contamination or incorrect programming in the camera processing module can stop the image from showing.
- What to do
- Check the VIN for this recall. Back up with extra care using mirrors until it is fixed.
Dashboard top cracks and crumbles
- What you'll notice
- Long splits open across the top of the dash, usually starting near the defroster vents and the passenger airbag line, and the edges break away into loose pieces.
- Why it happens
- The hard plastic dash panel of these trucks goes brittle in sunlight and heat, so it splits along its moulded seams once it ages.
- What to do
- Cosmetic, but have broken pieces secured or fitted with a cover so nothing rattles loose over the airbag or falls into the defroster vents.
Repair prices for your Ram 2500
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Install killer dowel pin retaining tab kit
- Replace with a remanufactured 47RE transmission
- Replace VP44 injection pump and lift pump
- Replace with a remanufactured 48RE transmission
- Replace all six injectors with connector tubes
- Replace EGR cooler
- Replace turbocharger
- Replace NOx sensor
- Inspect and secure drag link nut; replace drag link if needed
- Replace camshaft and lifters
- Replace CP4 pump, injectors, rail and lines; clean fuel system
- Replace side curtain airbags per recall
- Replace transmission dipstick and vent assembly per recall
- Inspect and replace intake heater grid relay
- Engine computer software update per recall
- Update or replace camera processing module per recall
- Update cluster software or replace cluster per recall
- Replace trailer tow module per recall
- Airbag controller software update per recall
- Replace steering column control module per recall
- Fit a moulded dash top cover or replace the dash pad
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Pick a model year to see its safety recalls.