Your 2000 Ram 2500problems, repair costs and recalls
What we've documented about the 2000 Ram 2500: problems owners and shops report, typical repair and upkeep costs, and safety recalls. Sold as the Dodge Ram 2500 through the 2010 model year.
Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.
Ownership snapshot
Averages, not quotesRoutine maintenance costs (model-wide, not specific to one year or engine)
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
Ask for an estimate
The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.
Known problems for your 2000 Ram 2500
4 documented issues apply to 2000, most serious first.
VP44 injection pump failure (weak lift pump)
- What you'll notice
- Hard starting, rough or surging idle, sudden loss of power or the engine dying while driving, often with a fuel-related trouble code.
- Why it happens
- The electronic VP44 injection pump is cooled and lubricated by the fuel it gets from the lift pump. When the factory lift pump weakens, the injection pump runs starved and hot and fails.
- What to do
- Have fuel supply pressure tested. Fix a weak lift pump before or along with any injection pump work. Tow the truck in if it stalls and will not restart.
Cracked "53" engine block
- What you'll notice
- Slow coolant loss, a damp spot or seepage on the passenger side of the block, white smoke or overheating.
- Why it happens
- Some blocks from this period, marked with a "53" casting number on the driver side, have thin water jacket walls that can crack, especially with towing, added power or overheating.
- What to do
- Stop driving if it is overheating. Have a diesel shop confirm the casting number and pressure-test the cooling system if coolant keeps disappearing.
47RE automatic slipping or losing overdrive
- What you'll notice
- Slipping under load, late or soft shifts, shudder when the converter locks, or no overdrive, especially when towing.
- Why it happens
- The 47RE four-speed automatic is marginal behind the Cummins torque. Heavy towing and heat wear the overdrive band, clutches and converter.
- What to do
- Check the fluid level and condition and have the transmission looked at early. Avoid heavy towing until it is fixed, since slipping builds heat and speeds up the damage.
Dashboard top cracks and crumbles
- What you'll notice
- Long splits open across the top of the dash, usually starting near the defroster vents and the passenger airbag line, and the edges break away into loose pieces.
- Why it happens
- The hard plastic dash panel of these trucks goes brittle in sunlight and heat, so it splits along its moulded seams once it ages.
- What to do
- Cosmetic, but have broken pieces secured or fitted with a cover so nothing rattles loose over the airbag or falls into the defroster vents.
Repair prices for your 2000 Ram 2500
Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.
- Replace with a remanufactured 47RE transmission
- Replace VP44 injection pump and lift pump
- Fit a moulded dash top cover or replace the dash pad
Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.
Checking the NHTSA recall database…