Home › Ram › 2500 › 1998
My vehicle

Your 1998 Ram 2500problems, repair costs and recalls

What we've documented about the 1998 Ram 2500: problems owners and shops report, typical repair and upkeep costs, and safety recalls. Sold as the Dodge Ram 2500 through the 2010 model year.

Pick your engine to hide problems that only affect other engines. Not sure? It is on the sticker under the hood or in the owner's manual.

Ownership snapshot

Averages, not quotes
Problems documented for 199842 rated serious
Safety recalls…Checking NHTSA

Routine maintenance costs (model-wide, not specific to one year or engine)

Oil and filter changeAbout every 7,500 miles (follow the oil-life monitor) · Cummins diesels take about 12 quarts of diesel-rated oil, so they cost more than the gas HEMIs.
Price not verified
Ask for an estimate
Front brake pads and rotorsAbout every 30,000–60,000 miles · Heavy towing wears brakes much faster.
Price not verified
Ask for an estimate
Rear brake pads and rotorsAbout every 40,000–70,000 miles
Price not verified
Ask for an estimate
Battery replacementAbout every 4–5 years · Cummins diesels use two batteries; replace them as a pair.
Price not verified
Ask for an estimate
Spark plug replacement (gas HEMI)About every 100,000 miles on newer engines · Gas HEMI V8s have 16 plugs; diesels have no spark plugs.
Price not verified
Ask for an estimate

The problems here are the ones we've documented so far, not a complete list or a reliability rating. Ask your shop for a written total that covers the work on your engine and trim, including any diagnostic fees, taxes and shop supplies.

Known problems for your 1998 Ram 2500

4 documented issues apply to 1998, most serious first.

Stop soon1996–1998Engine5.9L 12-valve Cummins diesel

Loose timing-case dowel pin ("killer dowel pin")

What you'll notice
Usually no warning. In the worst case a sudden loud clatter or grinding from the front of the engine, followed by the engine quitting.
Why it happens
A small alignment pin pressed into the front of the block behind the timing cover can work loose from vibration and fall into the timing gears.
What to do
If the pin has never been secured, have a diesel shop install a retaining tab kit. Shut the engine off right away if you hear new grinding from the front.
Repair costInsufficient verified pricing for this vehicle and repair
Install killer dowel pin retaining tab kit. Prepare an itemized shop request.
Stop soon1998–2002Fuel5.9L 24-valve Cummins diesel

VP44 injection pump failure (weak lift pump)

What you'll notice
Hard starting, rough or surging idle, sudden loss of power or the engine dying while driving, often with a fuel-related trouble code.
Why it happens
The electronic VP44 injection pump is cooled and lubricated by the fuel it gets from the lift pump. When the factory lift pump weakens, the injection pump runs starved and hot and fails.
What to do
Have fuel supply pressure tested. Fix a weak lift pump before or along with any injection pump work. Tow the truck in if it stalls and will not restart.
Repair costInsufficient verified pricing for this vehicle and repair
Replace VP44 injection pump and lift pump. Prepare an itemized shop request.
Get checked1996–2002Transmission

47RE automatic slipping or losing overdrive

What you'll notice
Slipping under load, late or soft shifts, shudder when the converter locks, or no overdrive, especially when towing.
Why it happens
The 47RE four-speed automatic is marginal behind the Cummins torque. Heavy towing and heat wear the overdrive band, clutches and converter.
What to do
Check the fluid level and condition and have the transmission looked at early. Avoid heavy towing until it is fixed, since slipping builds heat and speeds up the damage.
Repair costInsufficient verified pricing for this vehicle and repair
Replace with a remanufactured 47RE transmission. Prepare an itemized shop request.
Walk through this symptom: Transmission slipping →
Monitor1996–2002Body

Dashboard top cracks and crumbles

What you'll notice
Long splits open across the top of the dash, usually starting near the defroster vents and the passenger airbag line, and the edges break away into loose pieces.
Why it happens
The hard plastic dash panel of these trucks goes brittle in sunlight and heat, so it splits along its moulded seams once it ages.
What to do
Cosmetic, but have broken pieces secured or fitted with a cover so nothing rattles loose over the airbag or falls into the defroster vents.
Repair costInsufficient verified pricing for this vehicle and repair
Fit a moulded dash top cover or replace the dash pad. Prepare an itemized shop request.
Price guide

Repair prices for your 1998 Ram 2500

Insufficient verified pricing for this vehicle and repair. We have not yet matched these repairs to two independent, dated price sources for this vehicle, so we show no price, chart or verdict for them.

  • Install killer dowel pin retaining tab kit
  • Replace with a remanufactured 47RE transmission
  • Replace VP44 injection pump and lift pump
  • Fit a moulded dash top cover or replace the dash pad
Get help with a shop quote →

Disclaimer: Estimates only, not a quote. Ranges are averages built from typical parts prices plus standard book labor time at a typical shop labor rate. Your price will depend on your area, the shop, the parts used and what the shop finds. Dealers often charge more. Diagnosis and taxes are extra.

Safety recalls for the 1998 Ram 2500
Checking the NHTSA recall database…
Keep a copy of this pageDownload the snapshot, every problem, the repair costs and the recalls for your 1998 Ram 2500 as a PDF you can save, print or bring to your shop.
This page is a general guide based on widely reported problems. Not every vehicle is affected, and it doesn't replace an in-person diagnosis.