P040D Exhaust Gas Recirculation Temperature Sensor "A" Circuit High
What it means
The EGR temperature sensor signal is higher than it should ever be, which often means an open wire or unplugged sensor.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the EGR temperature sensor reading against engine temperature when cold
- Inspect the sensor connector and wiring near the hot exhaust parts
Signs you may notice
- Check engine light on
- Usually no change in how the vehicle drives
- EGR may be shut off, raising emissions
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed EGR temperature sensor
- CommonOpen or broken wire
- PossibleLoose or corroded connector
Typical repair once the cause is confirmed
Replace the sensor or repair the broken wiring.
Common questions
What does P040D mean?
The EGR temperature sensor signal is higher than it should ever be, which often means an open wire or unplugged sensor.
Can I drive with code P040D?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P040D?
Common possibilities to test include: failed egr temperature sensor; open or broken wire; loose or corroded connector. A shop should confirm the cause before replacing parts.