Home › Code lookup › P0410
Powertrain code · Emissions

P0410 Secondary Air Injection System

How urgent? Book a check when convenient

What it means

Many engines pump fresh air into the exhaust right after a cold start to help the catalytic converter warm up faster. The computer found a problem with that air injection system.

Can I keep driving?

Usually you can keep driving; this system mainly cuts emissions for the first minute or so after a cold start. Get it repaired before an emissions test. If you notice a burning smell near the pump or the fuse keeps blowing, get it checked sooner.

What to test before replacing parts

Check the fuse and relay, listen for the pump on a cold start, test the check valve for sticking or leaks, and check hoses and passages before replacing the pump.

  1. Listen for the air pump running for a minute or so after a cold start
  2. Check the air pump fuse and relay
  3. Inspect the check valve and hoses for moisture, carbon and cracks

Signs you may notice

  • Check engine light on
  • Loud whine or roar from the air pump after a cold start, or no pump noise at all
  • Usually no change in how the car drives
  • May fail an emissions test

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed secondary air pump
  • CommonStuck or leaking air check (combination) valve
  • CommonBlown fuse or bad air pump relay
  • PossibleCracked air hoses or clogged air passages
  • PossibleWiring problem to the pump or valve

Typical repair once the cause is confirmed

Often a new air pump and check valve; sometimes just a relay, fuse or hose.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air injection pump. Prepare an itemized shop request.

Where it shows up

  • Air pumps that take in water and seize are a frequent cause

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P0410 mean?

Many engines pump fresh air into the exhaust right after a cold start to help the catalytic converter warm up faster. The computer found a problem with that air injection system.

Can I drive with code P0410?

Usually you can keep driving; this system mainly cuts emissions for the first minute or so after a cold start. Get it repaired before an emissions test. If you notice a burning smell near the pump or the fuse keeps blowing, get it checked sooner.

What causes P0410?

Common possibilities to test include: failed secondary air pump; stuck or leaking air check (combination) valve; blown fuse or bad air pump relay; cracked air hoses or clogged air passages. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.