P0413 Secondary Air Injection System Switching Valve "A" Circuit Open
What it means
The circuit for the secondary air switching valve appears to be broken, so the valve cannot be switched on.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the valve resistance and the wiring to it
- Inspect the connector for corrosion or water
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOpen wire or unplugged connector
- CommonFailed valve solenoid coil
- PossibleBlown fuse
Typical repair once the cause is confirmed
Usually a new switching valve or a wiring repair.
Common questions
What does P0413 mean?
The circuit for the secondary air switching valve appears to be broken, so the valve cannot be switched on.
Can I drive with code P0413?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0413?
Common possibilities to test include: open wire or unplugged connector; failed valve solenoid coil; blown fuse. A shop should confirm the cause before replacing parts.