P0418 Secondary Air Injection System Relay "A" Circuit
What it means
The computer sees a problem in the circuit for the relay that switches the secondary air pump on after a cold start.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Swap the relay with an identical one and retest
- Check the fuse and relay socket for corrosion
Signs you may notice
- Check engine light on
- Air pump does not run, or runs all the time
- Usually no change in driving
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed air pump relay
- CommonBlown fuse
- PossibleWiring or connector fault
- PossibleSeized air pump overloading the circuit
Typical repair once the cause is confirmed
Often a new relay; if the pump is seized, the pump too.
Common questions
What does P0418 mean?
The computer sees a problem in the circuit for the relay that switches the secondary air pump on after a cold start.
Can I drive with code P0418?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0418?
Common possibilities to test include: failed air pump relay; blown fuse; wiring or connector fault; seized air pump overloading the circuit. A shop should confirm the cause before replacing parts.