Home › Code lookup › P041A
Powertrain code · Emissions

P041A Exhaust Gas Recirculation Temperature Sensor "B" Circuit

How urgent? Book a check when convenient

What it means

The computer sees an electrical fault with the second EGR temperature sensor, used mostly on diesel engines.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the EGR temperature sensor reading against engine temperature when cold
  2. Inspect the sensor connector and wiring near the hot exhaust parts

Signs you may notice

  • Check engine light on
  • Usually no change in how the vehicle drives
  • EGR may be shut off, raising emissions

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EGR temperature sensor "B"
  • CommonDamaged or heat-cracked wiring
  • PossibleCorroded connector

Typical repair once the cause is confirmed

Usually a new sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EGR temperature sensor. Prepare an itemized shop request.

Common questions

What does P041A mean?

The computer sees an electrical fault with the second EGR temperature sensor, used mostly on diesel engines.

Can I drive with code P041A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P041A?

Common possibilities to test include: failed egr temperature sensor "b"; damaged or heat-cracked wiring; corroded connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.