P0421 Warm Up Catalyst Efficiency Below Threshold (Bank 1)
What it means
The small catalytic converter close to the engine on bank 1, which does most of the cleaning right after a cold start, is not working as well as it should.
Can I keep driving?
Usually you can keep driving and book a repair, though it may fail an emissions test. If the check engine light flashes, the engine misfires, power drops or you smell strong rotten eggs or burning, get it checked soon; a clogged or overheating converter can cause damage and fire risk.
What to test before replacing parts
Check for misfires, exhaust leaks and oil burning, and verify both oxygen sensor readings before replacing the converter. Fix the root cause first or a new converter can fail too.
- Scan for misfire and fuel trim codes first and fix those
- Check for exhaust leaks near the oxygen sensors
- Compare upstream and downstream O2 sensor readings
Signs you may notice
- Check engine light on
- Usually no change in how the car drives
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonWorn-out warm-up (front) catalytic converter
- CommonFaulty downstream oxygen sensor
- PossibleExhaust leak near the oxygen sensors
- PossibleMisfire or oil burning that damaged the converter
Typical repair once the cause is confirmed
Usually a new front (warm-up) catalytic converter, after ruling out sensors and exhaust leaks.
Common questions
What does P0421 mean?
The small catalytic converter close to the engine on bank 1, which does most of the cleaning right after a cold start, is not working as well as it should.
Can I drive with code P0421?
Usually you can keep driving and book a repair, though it may fail an emissions test. If the check engine light flashes, the engine misfires, power drops or you smell strong rotten eggs or burning, get it checked soon; a clogged or overheating converter can cause damage and fire risk.
What causes P0421?
Common possibilities to test include: worn-out warm-up (front) catalytic converter; faulty downstream oxygen sensor; exhaust leak near the oxygen sensors; misfire or oil burning that damaged the converter. A shop should confirm the cause before replacing parts.