Home › Code lookup › P0422
Powertrain code · Emissions

P0422 Main Catalyst Efficiency Below Threshold (Bank 1)

How urgent? Book a check when convenient

What it means

The main catalytic converter on bank 1 is not cleaning the exhaust as well as it should.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Scan for misfire and fuel trim codes first and fix those
  2. Check for exhaust leaks near the oxygen sensors
  3. Compare upstream and downstream O2 sensor readings

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions test

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonWorn-out catalytic converter
  • CommonFaulty downstream (rear) oxygen sensor
  • PossibleExhaust leak near the oxygen sensors
  • PossibleEngine misfire or oil burning that damaged the converter

Typical repair once the cause is confirmed

Usually a new catalytic converter, after ruling out sensors and exhaust leaks.

Repair costInsufficient verified pricing for this vehicle and repair
Replace catalytic converter (bank 1). Prepare an itemized shop request.
Walk through it step by step: Check engine light on →

Common questions

What does P0422 mean?

The main catalytic converter on bank 1 is not cleaning the exhaust as well as it should.

Can I drive with code P0422?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0422?

Common possibilities to test include: worn-out catalytic converter; faulty downstream (rear) oxygen sensor; exhaust leak near the oxygen sensors; engine misfire or oil burning that damaged the converter. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.