Home › Code lookup › P0425
Powertrain code · Emissions

P0425 Catalyst Temperature Sensor (Bank 1)

How urgent? Book a check when convenient

What it means

The computer sees a problem with the sensor that measures catalytic converter temperature on bank 1. These sensors are mostly found on diesels and some turbo gas engines.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the sensor reading with other exhaust temperature sensors when the engine is cold
  2. Inspect the sensor wiring for heat damage near the exhaust

Signs you may notice

  • Check engine light on
  • Usually no change in how the vehicle drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed catalyst temperature sensor
  • CommonDamaged or heat-cracked wiring
  • PossibleCorroded connector

Typical repair once the cause is confirmed

Usually a new catalyst temperature sensor or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace catalyst temperature sensor. Prepare an itemized shop request.

Common questions

What does P0425 mean?

The computer sees a problem with the sensor that measures catalytic converter temperature on bank 1. These sensors are mostly found on diesels and some turbo gas engines.

Can I drive with code P0425?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0425?

Common possibilities to test include: failed catalyst temperature sensor; damaged or heat-cracked wiring; corroded connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.