Home › Code lookup › P0428
Powertrain code · Emissions

P0428 Catalyst Temperature Sensor High Input (Bank 1)

How urgent? Book a check when convenient

What it means

The bank 1 catalyst temperature sensor signal is higher than it should ever be, often from an open wire.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Compare the sensor reading with other exhaust temperature sensors when the engine is cold
  2. Inspect the sensor wiring for heat damage near the exhaust

Signs you may notice

  • Check engine light on
  • Usually no change in how the vehicle drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed sensor
  • CommonOpen or broken wire
  • PossibleUnplugged or corroded connector

Typical repair once the cause is confirmed

Replace the sensor or repair the wiring.

Repair costInsufficient verified pricing for this vehicle and repair
Replace catalyst temperature sensor. Prepare an itemized shop request.

Common questions

What does P0428 mean?

The bank 1 catalyst temperature sensor signal is higher than it should ever be, often from an open wire.

Can I drive with code P0428?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0428?

Common possibilities to test include: failed sensor; open or broken wire; unplugged or corroded connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.