P042D Catalyst Temperature Sensor Circuit High (Bank 1 Sensor 2)
What it means
The bank 1 sensor 2 catalyst temperature signal is higher than possible, often from an open wire.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Compare the sensor reading with other exhaust temperature sensors when the engine is cold
- Inspect the sensor wiring for heat damage near the exhaust
Signs you may notice
- Check engine light on
- Usually no change in how the vehicle drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed sensor
- CommonOpen or broken wire
- PossibleUnplugged or corroded connector
Typical repair once the cause is confirmed
Replace the sensor or repair the wiring.
Common questions
What does P042D mean?
The bank 1 sensor 2 catalyst temperature signal is higher than possible, often from an open wire.
Can I drive with code P042D?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P042D?
Common possibilities to test include: failed sensor; open or broken wire; unplugged or corroded connector. A shop should confirm the cause before replacing parts.