Home › Code lookup › P042E
Powertrain code · Emissions

P042E Exhaust Gas Recirculation "A" Control Stuck Open

How urgent? Get it checked in the next few days

What it means

The computer thinks the EGR valve is stuck open, letting exhaust into the engine when it should not. This can cause rough running and is most often seen on diesels.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Command the EGR valve closed with a scan tool and watch actual position
  2. Remove and inspect the valve for carbon or soot

Signs you may notice

  • Check engine light on
  • Rough idle, stalling or lack of power
  • Black smoke on diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonEGR valve stuck open from carbon or soot
  • CommonFailed EGR valve motor or position sensor
  • PossibleWiring fault to the EGR valve

Typical repair once the cause is confirmed

Usually cleaning or replacing the EGR valve.

Repair costInsufficient verified pricing for this vehicle and repair
Walk through it step by step: Rough idle or shaking when stopped →

Common questions

What does P042E mean?

The computer thinks the EGR valve is stuck open, letting exhaust into the engine when it should not. This can cause rough running and is most often seen on diesels.

Can I drive with code P042E?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P042E?

Common possibilities to test include: egr valve stuck open from carbon or soot; failed egr valve motor or position sensor; wiring fault to the egr valve. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.