P0440 Evaporative Emission Control System
What it means
The EVAP system traps gasoline vapors from the fuel tank so they do not escape into the air. The computer found a general problem with that system, such as a leak or a valve not working.
Can I keep driving?
Usually safe to keep driving; this is an emissions-system fault that rarely changes how the car runs. Make sure the gas cap is on tight. If you smell strong raw fuel or see fuel leaking, stop driving and get it checked right away because of the fire risk.
What to test before replacing parts
Check the gas cap seal first, then smoke test the EVAP system and command the purge and vent valves before replacing the canister or valves.
- Check that the gas cap clicks tight and its seal is not cracked
- Have a smoke test done to find leaks
- Test the purge and vent valves with a scan tool
Signs you may notice
- Check engine light on
- No change in how the car drives
- Faint fuel smell in some cases
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose, damaged or wrong gas cap
- CommonLeaking EVAP hose or charcoal canister
- CommonFaulty purge or vent valve
- PossibleFaulty fuel tank pressure sensor
- PossibleCracked filler neck
Typical repair once the cause is confirmed
Often a gas cap, purge valve or vent valve; a smoke test pinpoints leaks.
Common questions
What does P0440 mean?
The EVAP system traps gasoline vapors from the fuel tank so they do not escape into the air. The computer found a general problem with that system, such as a leak or a valve not working.
Can I drive with code P0440?
Usually safe to keep driving; this is an emissions-system fault that rarely changes how the car runs. Make sure the gas cap is on tight. If you smell strong raw fuel or see fuel leaking, stop driving and get it checked right away because of the fire risk.
What causes P0440?
Common possibilities to test include: loose, damaged or wrong gas cap; leaking evap hose or charcoal canister; faulty purge or vent valve; faulty fuel tank pressure sensor. A shop should confirm the cause before replacing parts.