Home › Code lookup › P0441
Powertrain code · Emissions

P0441 Evaporative Emission Control System Incorrect Purge Flow

How urgent? Book a check when convenient

What it means

The purge valve lets stored fuel vapors get burned in the engine. The computer sees vapor flow when there should be none, or no flow when there should be some.

Can I keep driving?

Usually safe to keep driving. If the car is hard to start or stalls right after refueling, get it checked sooner, since a stall in traffic is risky. If you smell strong raw fuel or see a leak, stop and get it looked at.

What to test before replacing parts

Command the purge valve with a scan tool and check that it seals when off and flows when on, inspect the purge hose and canister, and check the tank pressure sensor before replacing parts.

  1. Check the purge valve holds vacuum when off and opens when commanded
  2. Inspect purge hoses between the engine and canister
  3. Look for charcoal granules in the purge lines

Signs you may notice

  • Check engine light on
  • Rough idle or hard starting right after refueling if the purge valve sticks open
  • Usually no change in driving otherwise

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFaulty purge valve (stuck open or closed)
  • CommonCracked or disconnected purge hose
  • PossibleClogged or saturated charcoal canister
  • PossibleFaulty fuel tank pressure sensor
  • PossibleWiring fault at the purge valve

Typical repair once the cause is confirmed

Usually a new purge valve; sometimes a hose or charcoal canister.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EVAP purge valve. Prepare an itemized shop request.

Known on these vehicles

Walk through it step by step: Check engine light on →

Common questions

What does P0441 mean?

The purge valve lets stored fuel vapors get burned in the engine. The computer sees vapor flow when there should be none, or no flow when there should be some.

Can I drive with code P0441?

Usually safe to keep driving. If the car is hard to start or stalls right after refueling, get it checked sooner, since a stall in traffic is risky. If you smell strong raw fuel or see a leak, stop and get it looked at.

What causes P0441?

Common possibilities to test include: faulty purge valve (stuck open or closed); cracked or disconnected purge hose; clogged or saturated charcoal canister; faulty fuel tank pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.