Home › Code lookup › P0444
Powertrain code · Emissions

P0444 Evaporative Emission Control System Purge Control Valve Circuit Open

How urgent? Book a check when convenient

What it means

The computer sees a break in the electrical circuit for the EVAP purge valve.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the purge valve connector and resistance
  2. Check for power at the connector

Signs you may notice

  • Check engine light on
  • No change in how the car drives
  • May fail an emissions test

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed purge valve coil
  • CommonUnplugged or corroded connector
  • PossibleBroken wire or blown fuse

Typical repair once the cause is confirmed

Usually a new purge valve or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EVAP purge valve. Prepare an itemized shop request.

Common questions

What does P0444 mean?

The computer sees a break in the electrical circuit for the EVAP purge valve.

Can I drive with code P0444?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0444?

Common possibilities to test include: failed purge valve coil; unplugged or corroded connector; broken wire or blown fuse. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.