Home › Code lookup › P044A
Powertrain code · Emissions

P044A Exhaust Gas Recirculation Sensor "C" Circuit

How urgent? Book a check when convenient

What it means

The computer sees an electrical problem with a third EGR sensor, used on some engines (mostly diesels) to monitor EGR flow or position.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor reference voltage, ground and signal at the connector
  2. Inspect wiring near hot exhaust parts

Signs you may notice

  • Check engine light on
  • EGR may be shut off, raising emissions
  • Usually little change in driving

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EGR sensor "C"
  • CommonDamaged wiring or connector
  • PossibleEngine computer fault

Typical repair once the cause is confirmed

Usually a new sensor or a wiring repair.

Common questions

What does P044A mean?

The computer sees an electrical problem with a third EGR sensor, used on some engines (mostly diesels) to monitor EGR flow or position.

Can I drive with code P044A?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P044A?

Common possibilities to test include: failed egr sensor "c"; damaged wiring or connector; engine computer fault. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.