Home › Code lookup › P044D
Powertrain code · Emissions

P044D Exhaust Gas Recirculation Sensor "C" Circuit High

How urgent? Book a check when convenient

What it means

The EGR sensor "C" signal is higher than possible, often from an open wire.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor reference voltage, ground and signal at the connector
  2. Inspect wiring near hot exhaust parts

Signs you may notice

  • Check engine light on
  • EGR may be shut off, raising emissions
  • Usually little change in driving

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed EGR sensor "C"
  • CommonOpen or broken wire
  • PossibleSignal shorted to voltage

Typical repair once the cause is confirmed

Replace the sensor or repair the wiring.

Common questions

What does P044D mean?

The EGR sensor "C" signal is higher than possible, often from an open wire.

Can I drive with code P044D?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P044D?

Common possibilities to test include: failed egr sensor "c"; open or broken wire; signal shorted to voltage. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.