Home › Code lookup › P044F
Powertrain code · Emissions

P044F Secondary Air Injection System Switching Valve "A" Circuit High

How urgent? Book a check when convenient

What it means

The control circuit for the valve that lets air pump air into the exhaust is reading higher voltage than expected, usually from an open wire or a bad valve.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the valve resistance and wiring
  2. Inspect the connector for corrosion or water

Signs you may notice

  • Check engine light on
  • Usually no change in how the car drives
  • May fail an emissions test

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonOpen wire or unplugged connector
  • CommonFailed switching valve solenoid
  • PossibleWiring shorted to voltage

Typical repair once the cause is confirmed

Usually a new switching valve or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace secondary air switching (check) valve. Prepare an itemized shop request.

Common questions

What does P044F mean?

The control circuit for the valve that lets air pump air into the exhaust is reading higher voltage than expected, usually from an open wire or a bad valve.

Can I drive with code P044F?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P044F?

Common possibilities to test include: open wire or unplugged connector; failed switching valve solenoid; wiring shorted to voltage. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.