P0458 Evaporative Emission System Purge Control Valve Circuit Low
What it means
The circuit for the EVAP purge valve is reading lower voltage than it should, which usually means a short or a failed valve.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check for power at the purge valve connector
- Measure the purge valve resistance
Signs you may notice
- Check engine light on
- No change in how the car drives
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed purge valve
- CommonWiring shorted to ground
- PossibleOpen power feed or blown fuse
Typical repair once the cause is confirmed
Usually a new purge valve or a wiring repair.
Common questions
What does P0458 mean?
The circuit for the EVAP purge valve is reading lower voltage than it should, which usually means a short or a failed valve.
Can I drive with code P0458?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0458?
Common possibilities to test include: failed purge valve; wiring shorted to ground; open power feed or blown fuse. A shop should confirm the cause before replacing parts.