P0459 Evaporative Emission System Purge Control Valve Circuit High
What it means
The circuit for the EVAP purge valve is reading higher voltage than it should, often from an open circuit or failed valve.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Measure the purge valve resistance
- Inspect the connector and wiring
Signs you may notice
- Check engine light on
- No change in how the car drives
- May fail an emissions test
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed purge valve coil
- CommonUnplugged or corroded connector
- PossibleWiring shorted to voltage
Typical repair once the cause is confirmed
Usually a new purge valve or a wiring repair.
Common questions
What does P0459 mean?
The circuit for the EVAP purge valve is reading higher voltage than it should, often from an open circuit or failed valve.
Can I drive with code P0459?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0459?
Common possibilities to test include: failed purge valve coil; unplugged or corroded connector; wiring shorted to voltage. A shop should confirm the cause before replacing parts.