Home › Code lookup › P0467
Powertrain code · Emissions

P0467 EVAP Purge Flow Sensor Circuit Low

How urgent? Book a check when convenient

What it means

The EVAP purge flow sensor signal is lower than possible.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor connector and wiring
  2. Check the reference voltage and signal at the sensor

Signs you may notice

  • Check engine light on
  • No change in how the car drives

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed purge flow sensor
  • CommonSignal wire shorted to ground
  • PossibleDamaged connector

Typical repair once the cause is confirmed

Replace the sensor or repair the wiring.

Common questions

What does P0467 mean?

The EVAP purge flow sensor signal is lower than possible.

Can I drive with code P0467?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0467?

Common possibilities to test include: failed purge flow sensor; signal wire shorted to ground; damaged connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.