P0468 EVAP Purge Flow Sensor Circuit High
What it means
The EVAP purge flow sensor signal is higher than possible.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Check the sensor connector and wiring
- Check the reference voltage and signal at the sensor
Signs you may notice
- Check engine light on
- No change in how the car drives
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonFailed purge flow sensor
- CommonOpen wire or unplugged connector
- PossibleSignal shorted to voltage
Typical repair once the cause is confirmed
Replace the sensor or repair the wiring.
Common questions
What does P0468 mean?
The EVAP purge flow sensor signal is higher than possible.
Can I drive with code P0468?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0468?
Common possibilities to test include: failed purge flow sensor; open wire or unplugged connector; signal shorted to voltage. A shop should confirm the cause before replacing parts.