P046F Exhaust Gas Recirculation Sensor "B" Circuit Intermittent/Erratic
What it means
The second EGR sensor signal keeps dropping out or jumping around.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Watch the EGR sensor reading on a scan tool while the valve is commanded
- Inspect sensor hoses or ports for soot and the wiring for damage
Signs you may notice
- Check engine light on
- Usually little change in driving
- EGR may be shut off, raising emissions
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonLoose or corroded connector
- CommonChafed wiring
- PossibleFailing sensor
Typical repair once the cause is confirmed
Repair the wiring or connector, or replace the sensor.
Common questions
What does P046F mean?
The second EGR sensor signal keeps dropping out or jumping around.
Can I drive with code P046F?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P046F?
Common possibilities to test include: loose or corroded connector; chafed wiring; failing sensor. A shop should confirm the cause before replacing parts.