Home › Code lookup › P0470
Powertrain code · Engine

P0470 Exhaust Pressure Sensor "A" Circuit

How urgent? Book a check when convenient

What it means

The computer sees a problem with the sensor that measures pressure in the exhaust, used mostly on diesels to manage the turbo and EGR.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor reading with the engine off (it should match the air pressure reading)
  2. Inspect the sensor tube or hose for soot clogging or cracks
  3. Check the wiring and connector

Signs you may notice

  • Check engine light on
  • Possible loss of power or slow turbo response
  • Possible hard starting on some diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed exhaust pressure sensor
  • CommonClogged sensor tube or port
  • PossibleDamaged wiring or connector

Typical repair once the cause is confirmed

Usually a new exhaust pressure sensor and clearing the sensor tube.

Repair costInsufficient verified pricing for this vehicle and repair
Replace exhaust back pressure sensor. Prepare an itemized shop request.

Common questions

What does P0470 mean?

The computer sees a problem with the sensor that measures pressure in the exhaust, used mostly on diesels to manage the turbo and EGR.

Can I drive with code P0470?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0470?

Common possibilities to test include: failed exhaust pressure sensor; clogged sensor tube or port; damaged wiring or connector. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.