Home › Code lookup › P0471
Powertrain code · Engine

P0471 Exhaust Pressure Sensor "A" Circuit Range/Performance

How urgent? Book a check when convenient

What it means

The exhaust pressure sensor gives readings that do not fit how the engine is running.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Check the sensor reading with the engine off (it should match the air pressure reading)
  2. Inspect the sensor tube or hose for soot clogging or cracks
  3. Check the wiring and connector

Signs you may notice

  • Check engine light on
  • Possible loss of power or slow turbo response
  • Possible hard starting on some diesels

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSoot-clogged sensor tube or port
  • CommonFailing exhaust pressure sensor
  • PossibleExhaust leak near the sensor
  • PossibleWiring problem

Typical repair once the cause is confirmed

Usually clearing or replacing the sensor tube and replacing the sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace exhaust back pressure sensor. Prepare an itemized shop request.

Where it shows up

  • Well known on Ford 6.0L Power Stroke diesels when the sensor tube clogs with soot

Common questions

What does P0471 mean?

The exhaust pressure sensor gives readings that do not fit how the engine is running.

Can I drive with code P0471?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0471?

Common possibilities to test include: soot-clogged sensor tube or port; failing exhaust pressure sensor; exhaust leak near the sensor; wiring problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.