Home › Code lookup › P0476
Powertrain code · Engine

P0476 Exhaust Pressure Control Valve "A" Range/Performance

How urgent? Book a check when convenient

What it means

The exhaust pressure control valve is not producing the result the computer expects when it is commanded.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Command the valve with a scan tool and watch it move
  2. Check the valve for soot or rust holding it in place
  3. Check the wiring and connector

Signs you may notice

  • Check engine light on
  • Slower warm-up or weak cab heat on some diesels
  • Possible loss of power if the valve sticks closed

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSticking valve from soot or rust
  • CommonFailing actuator
  • PossibleFaulty exhaust pressure sensor

Typical repair once the cause is confirmed

Usually freeing up or replacing the valve, or replacing the pressure sensor.

Repair costInsufficient verified pricing for this vehicle and repair
Replace exhaust pressure control valve. Prepare an itemized shop request.

Common questions

What does P0476 mean?

The exhaust pressure control valve is not producing the result the computer expects when it is commanded.

Can I drive with code P0476?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0476?

Common possibilities to test include: sticking valve from soot or rust; failing actuator; faulty exhaust pressure sensor. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.