P0478 Exhaust Pressure Control Valve "A" High
What it means
The control circuit for the exhaust pressure control valve is reading higher than expected, often from an open circuit.
Can I keep driving?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What to test before replacing parts
A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.
- Command the valve with a scan tool and watch it move
- Check the valve for soot or rust holding it in place
- Check the wiring and connector
Signs you may notice
- Check engine light on
- Slower warm-up or weak cab heat on some diesels
- Possible loss of power if the valve sticks closed
Possible causes
Most likely first. Directions for testing, not confirmed failures.
- CommonOpen wire or unplugged connector
- CommonFailed valve actuator
- PossibleWiring shorted to voltage
Typical repair once the cause is confirmed
Repair the wiring or replace the valve actuator.
Common questions
What does P0478 mean?
The control circuit for the exhaust pressure control valve is reading higher than expected, often from an open circuit.
Can I drive with code P0478?
Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.
What causes P0478?
Common possibilities to test include: open wire or unplugged connector; failed valve actuator; wiring shorted to voltage. A shop should confirm the cause before replacing parts.