Home › Code lookup › P0482
Powertrain code · Cooling

P0482 Cooling Fan 3 Control Circuit

How urgent? Get it checked in the next few days

What it means

The computer found an electrical problem in the circuit for the third cooling fan speed or fan on vehicles that have one.

Can I keep driving?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Turn on the A/C and see whether the cooling fans come on
  2. Check the cooling fan fuses and relays
  3. Check for power and ground at the fan connector

Signs you may notice

  • Check engine light on
  • Engine may run hot in traffic
  • A/C may blow warm at idle

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonFailed fan relay
  • CommonFailed fan motor
  • PossibleWiring or fuse problem

Typical repair once the cause is confirmed

Usually a new fan relay or fan motor, or a wiring repair.

Repair costInsufficient verified pricing for this vehicle and repair
Replace cooling fan motor or fan assembly. Prepare an itemized shop request.
Walk through it step by step: Overheats in traffic or at idle →

Common questions

What does P0482 mean?

The computer found an electrical problem in the circuit for the third cooling fan speed or fan on vehicles that have one.

Can I drive with code P0482?

If the check engine light flashes, the engine runs rough, overheats, loses power or stalls, pull over when it is safe and get help. Otherwise get it checked in the next few days and drive gently until then.

What causes P0482?

Common possibilities to test include: failed fan relay; failed fan motor; wiring or fuse problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.