Home › Code lookup › P0488
Powertrain code · Emissions

P0488 Exhaust Gas Recirculation Throttle Control Circuit "A" Range/Performance

How urgent? Book a check when convenient

What it means

The EGR throttle plate is not moving to the position the computer asks for, usually because soot is making it stick.

Can I keep driving?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What to test before replacing parts

A shop should confirm the fault with a scan tool and a few tests before replacing parts. The code points to where to test, not to a confirmed failed part.

  1. Inspect the throttle plate for soot and clean it
  2. Command the throttle with a scan tool and watch actual position

Signs you may notice

  • Check engine light on
  • Possible reduced power on diesels
  • EGR flow may be reduced

Possible causes

Most likely first. Directions for testing, not confirmed failures.

  • CommonSoot or carbon buildup on the throttle plate
  • CommonFailing throttle motor or position sensor
  • PossibleWiring problem

Typical repair once the cause is confirmed

Usually cleaning or replacing the EGR or intake throttle valve.

Repair costInsufficient verified pricing for this vehicle and repair
Replace EGR or intake throttle valve. Prepare an itemized shop request.

Common questions

What does P0488 mean?

The EGR throttle plate is not moving to the position the computer asks for, usually because soot is making it stick.

Can I drive with code P0488?

Usually you can keep driving while you book a check. If other warning lights come on, or the car starts running or shifting differently, get it checked sooner.

What causes P0488?

Common possibilities to test include: soot or carbon buildup on the throttle plate; failing throttle motor or position sensor; wiring problem. A shop should confirm the cause before replacing parts.

Related codes

Trouble codes point to where a problem was detected, not always to the failed part. A scan and a few tests confirm the cause before parts are replaced. This is a general guide, not a diagnosis.